Lipari 5100

4G cellular router - LAN/Serial

The Lipari 5100 is a 4G LAN router, particularly suitable for installation in industrial environments and M2M application scenarios.
It complies with the IEC 61850-3:2014-12 standard for communication and automation of systems in power substations, remote control and remote monitoring.

Key factors

Certified

Validated for inclusion in business offering profiles and use within the networks of major telecom operators.

Robust

Designed to be durable and operate long-term, even in industrial and challenging environments.

Secure By Design

Built with security in mind from the design stage, ensuring robust and secure solutions.

Smart Value

Maximizes business value with an excellent performance-to-price ratio.

LAN	FE	2	10/100 Mbps ports - RJ45 connector, with or without auto-negotiation and configurable
RADIO CELLULAR	GSM /GPRS / EDGE		GSM 850 (850 MHz) EGSM 900 (900 MHz) DCS 1800 (1800 MHz) PCS 1900 (1900 MHz) EDGE throughput up to 236 kbps
	UMTS (WCDMA) / HSDPA / HSUPA / HSPA+ / DC-HSPA+		Band 1 (2100 MHz) Band 2 (1900 MHz) Band 5 (850 MHz) Band 6 (800 MHz) Band 8 (900 MHz) HSPA+: rates Downlink: Up to 42 Mbps (category 24), Uplink: Up to 5.76 Mbps
	LTE		Frequency bands: 800 / 900 / 1800 / 2100 / 2600 Mhz Data rates category 4, MIMO* Peek data rates 150 Mbps DL, 50 Mbps UL (actual throughput is dependent on network configuration, bandwidth assigned to the UE, the number of users and RF signal conditions) WCDMA 900/2100
CONSOLE		1	Asynchronous DB9 connector up to 115.2 Kbps

Note: the list below is purely indicative; the features depend on the NoS version and update.

NETWORKING

TCP-UDP IPv4
QoS

LAYER 2 features

Layer 2 Protocol Tunneling (L2PT) v3
VLAN 802.1q over Ethernet
Pseudowire Ethernet to extend layer-2 circuits over IP networks

ROUTING & MULTICAST

Static, RIPv1, RIPv2
BGP-4, BGP-4+
OSPFv2
VRRP (Virtual Routing Redundancy Protocol)
IGMP proxying
Multicast routing with PIMv2 sparse-mode and PIMv2 dense-mode

SICUREZZA

NAT/PAT
ACLs, Stateful Firewall
GRE Tunnelling with keep alive and key sequence numbering (cellular network optimization)
VPN with IPSEC
Easy VPN, DMVPN, Open VPN
3 DES Encryption

SERVIZI

DHCP client, DHCP server and relay
Traceroute
DDns

GESTIONE E CONFIGURAZIONE

SNMP v1, SNMPv2, SNMPv3
Telnet server
SSH server with multiple simultaneous sessions (SSHv2)
Fault management Syslog local and remote
Radius Support, TACACS+
SAA (service Assurance Agent)
SMS
Configuration via command Line Interface (CLI), Text/Menu oriented and Telnet
Configuration via web interface on HTTP protocol
TNA (Tiesse Network Architecture) suite for auto-provisioning and remote automated management

Declaration of conformity Lipari 5100

Declaration of conformity Lipari 5100-DC